Reinmatic
SWEEPER FOR INDOOR AND OUTDOOR SURFACES

KRM 80. Sweeper for indoor and outdoor surfaces.

The KRM 80 is a mechanical sweeper for indoor and outdoor surfaces. With two side brushes, a 1.2 m working width, and an 80 L waste hopper, it suits halls, warehouses, garages, loading ramps, parking areas, entrance zones, and outdoor working surfaces — with no battery, no fuel, and no drive-related running costs.

Request a quote for the KRM 80
Key performance
120 cm
Cleaning width
80 L
Waste hopper
2
Side brushes
28 kg
Total weight
Studio view of the Reinmatic KRM 80 manual sweeper — Signal-mint hopper cover, two angled black side brushes, drive wheels, and a folding push handle

Where the KRM 80 belongs.

Two side brushes steer dust, leaves, and fine debris from the edges into the 80 L hopper — one operator keeps halls, warehouses, garages, loading ramps, parking areas, entrance zones, and other indoor and outdoor surfaces clear. No startup, no fuel, no complicated maintenance.

Applications

  • Warehouses and loading docks
  • Parking lots and access roads
  • Workshops and garages
  • Production and storage halls
  • Sidewalks and walkways
  • Yards and plazas

The KRM 80 runs entirely mechanically — no battery, no fuel, no electrical connection.

Ready to work the moment the operator pushes it forward. Every pass clears 1.2 m of width, and the only operating cost is the operator's time — no charging, no refilling, no waiting between shifts.

Reinmatic KRM 80 manual sweeper at work on a warehouse floor — two angled side brushes sweeping debris across the 1.2 m working path

Two side brushes, 1.2 m working width — more area per pass.

A 480 mm central brush and two 350 mm side brushes deliver a 1,200 mm total cleaning width. Loading docks, plazas, warehouse aisles, and parking areas clear far faster — fewer passes, higher operator productivity.

Side brushes capture debris from edge to center — the full cleaning width in a single pass.

Angled side brushes reach into curbs, walls, and corners, steering dust, leaves, and fine debris toward the central brush and hopper. Dirt along edges and in corners is collected on the first pass — no separate edge cleaning needed.

Low-angle close-up of the two angled side brushes on the Reinmatic KRM 80 pulling fine debris across a concrete floor

An 80 L hopper — more cleaning, fewer empties.

The KRM 80 keeps working where smaller machines would already need emptying. The hopper removes and reseats in one motion, with no tools and no added maintenance cost.

Operator pushing the Reinmatic KRM 80 manual sweeper across the paved yard in front of a REINMATIC-branded facility, side brushes gathering leaves into the 80 L hopper

KRM 80 — always ready to work, at the lowest cost in its class.

A mechanical drive with no battery, no fuel, and no emissions means no charging, no refilling, and no complex maintenance. The result is quiet indoor operation and one of the lowest costs per hour in the floor-sweeper category.

Reinmatic KRM 80 manual sweeper on an outdoor paved plaza — no battery, no fuel

Professional functions. Mechanical simplicity.

The KRM 80 offers every core function of a professional floor sweeper — a 1.2 m working path, two side brushes, a central collection system, and an 80 L hopper. Everything runs mechanically, with no battery, fuel, or electrical power.

Functions and capabilities

  • Fully mechanical operation. No battery. No power.
  • Twin side-brush system Edge to center. Two side brushes collect dust and debris along walls, curbs, and obstacles, steering them toward the central brush and waste hopper.
  • Wide cleaning width At 1.2 m of working path, the KRM 80 covers more area with every operator step. Fewer passes, less time, and jobs finished faster.
  • Efficient dust and debris collection From fine dust to leaves and larger debris. The KRM 80 gathers the dirt and holds it in the 80 L hopper, keeping surfaces clean in the fewest possible passes.
  • Quiet, motorless operation No engine noise, no emissions, no vibration. The KRM 80 makes for more comfortable operation and less disruption in the space being maintained.
  • Simple to operate Push forward and start working. No engine to start, no charging, and no complicated controls — the KRM 80 makes floor cleaning fast and straightforward.
  • Compact build A wide cleaning width doesn't require a large machine. The KRM 80 is compact enough for everyday work, transport, and storage, yet efficient enough for large areas.

Intelligent functions

  • Professional twin side-brush system Edge to center. Two side brushes gather dirt along curbs, walls, and obstacles, steering it toward the central collection system.
  • Balanced manual control Easy to push. Simple to guide. A balanced weight layout allows natural handling and control without unnecessary effort.
  • Reduced dust-lift system
  • Quiet-operation system No motor, no fuel — low-noise, ready when you are.
  • High-capacity waste collection Engineered for larger volumes of dust, leaves, and fine debris, with fewer work interruptions to empty the hopper.
  • Easy-maneuvering build A compact design and balanced weight layout make it easy to guide through aisles, around obstacles, and across tight surfaces.
  • Low maintenance costs With no motor, battery, or complex drive components, the KRM 80 needs minimal maintenance and runs economically over the long term. A fully mechanical build without a motor, battery, or complex drive systems reduces servicing needs and keeps operating costs to a minimum.
  • Durable mechanical operating system A simple mechanical build with few moving parts is engineered for a long service life, reliable operation, and minimal maintenance demands.
  • Fully mechanical cleaning system No motor, no battery, and no electrical power. The operator's motion drives the brush system and debris collection.
  • Two side brushes and one central brush The three-brush combination delivers a 1.2 m working path and even debris collection across the entire cleaning width.
  • Emission-free, eco-friendly operation No fuel. No exhaust. No needless energy use. The KRM 80 keeps surfaces clean without affecting air quality in the work area.
  • Large waste capacity More collected debris means fewer work interruptions. The 80 L hopper allows longer cleaning before an emptying trip.
  • The KRM 80 guides easily and controls precisely, letting the operator cover large areas with minimal physical effort.
  • Professional waste-collection system From surface edge to hopper. The brush system and 80 L hopper work together so dirt is collected in a single pass.

Benefits

  • No battery or fuel costs
  • Quiet operation
  • Simple maintenance
  • Professional, fast cleaning
  • Very low running costs
Specs by system

Technical specifications

Mechanical

Cleaning width
1,200 mm
Central brush
480 mm
Side brushes
2 × 350 mm

Capacity

Waste hopper
80 L
Working speed
0–8 km/h

Dimensions

Length
1,300 mm
Width
1,200 mm
Height
1,150 mm
Net weight
28 kg

Compliance

Class
Manual sweeper
Power source
Manual (no power source)
Standards
CE, RoHS
Gallery

See the KRM 80.

Configured for your floor.

The KRM 80 ships ready to work with a central brush, two side brushes, and an 80 L hopper. Replacement brushes and wear parts are available through the Reinmatic service network, and the simple mechanical build keeps maintenance costs to a minimum.

Request the accessories list →
  • Brushes

Compare models

KRM 90 scrubber-dryer

A step up — KRM 90

When you need more productivity, the KRM 90 takes over. With output up to 5,000 m²/h, a 1.28 m working path, and a self-propelled drive, it's built for large warehouses, industrial facilities, parking areas, and logistics centers. A dust-control system helps keep the work environment cleaner during operation.

5,000 m²/h
Productivity
128 cm
Working width
90 L
Waste hopper
Compare KRM 80 with KRM 90 →

Find the right KRM 80 for your facility.

Tell us which surface you maintain and how large the area to clean is. We'll help you decide whether the KRM 80 is the right fit and send you a matching quote.

Request a quote for the KRM 80